Features

Advanced 2D Graphics

• BitBLT, ROP3 and ROP4
• DrawLine
• Sprites
• Font caching
• Font anti-aliasing
• Scaling
• Alpha blending
• 90 degree rotation
• Gouraud shading

MPEG/JPEG decoder

• iDCT engine
• Motion Compensation
• Scaling
• Color Space Conversion (CSC)
• CIF (and QCIF) decode at 30-fps

Host Interface

• 16/32 bit Standard SRAM interface to connect to many market leading CPUs, including:
• Intel® StrongARM™/ Xscale
• Motorola DragonBall™ / MX1
• TI OMAP
• Samsung S3C24xxx
• Other proprietary low pin count CPUs.

Integrated Frame Buffer

• 384KB of embedded SRAM
• For double buffered QVGA images
• High performance with wide internal memory I/F

Display Support

• 4/8 bit monochrome
• 12/15/16/18 bit color STN
• 12/15/16/18 bit TFT
• Maximum resolution 320x480 at a color depth of 16-bpp
• Partial display refresh
• 2 HW cursors, 1 HW icon/overlay
• Frame modulation
• Panel rotation (90°, 180°, 270°)

Clock Source

• Single clock input (low frequency crystal)

USB OTG (On-The-Go) Support

• Imageon™ 3200 is the first integrated co-processor to offer USB OTG
• A new standard that connects two USB devices directly
• Offers 2 USB hosts and a Dual Role Device (DRD - host or client)
• Utilizes the master/slave architecture of USB

Video Capture Port

• Connect video peripherals (such as a camera) to the handheld device
• Supports CCiR 656, YCrCb 4:2:2 with 8-bit data bus
• Supports embedded control signals into data stream
• Supports separate Vsync, Hsync
• Capture resolution up to 640x480 pixels

SD Memory and I/O Controller

• Target for portable and stationary applications
• Designed for read-only or read/write cards
• Up to 10MB/second Read/Write rate using 4 parallel data lines
• Internal SRAM buffer
• Multiple port architecture with support for 2 slots
• Card detection/insertion/removal
• Transfer support for any byte size
• Compatibility with Multi-Media-Card (MMC)
• Operational voltage: 3.3V
• Low power consumption

Operating Voltage

• 1.2V to 1.8V for Core supply
  
• 3.3V for USB, Video Capture and JTAG
  
• 1.5V to 3.3V for Host, LCD I/F and other I/O supplies

Power Down Modes

• Hardware: dynamic power down for inactive blocks
• Low power / low voltage process
• Software control
• Power consumption
• Standby: 0.01mW
• Display refresh: 5mW
• Typical: 20mW

Package

• 236-pin TFBGA, 10mm x 10mm @ 0.5µm ball pitch
• Package options: COB and COF

Development Support

• Reference Design Kit
• Diagnostic utility
• Demonstration software

API Interface

• AMD Core Driver - hardware abstraction layer
• High Performance API

Supported Operating Systems

• Windows® CE and Pocket PC
• Palm OS®
• Linux, Embeddix/Qt
• Symbian EPOC
• Other proprietary Operating Systems